No doubt a large part of the cost is incurred in electrical problems due to corroded wire connections in all types of vehicles. Much of the wiring on a motor vehicle is exposed to foul weather and dirt on a constant basis. This is why Superior Terminals offer the entire NSPA Krimpa-Seal range of terminals online and in-store.

Made with polyolefin tubing, the Krimpa-Seal range is the perfect selection for your electrical wiring needs. For a Waterproof/Weatherproof seal simply crimp the terminal, and apply heat.

Krimpa-Seal Instructions:

  1. Strip your cable wire, to a striped section length of 5/16" (8mm)
  2. Insert wire into Krimpa-Seal Terminal Barrel
  3. Using the correct crimp die, crimp wire to barrel 
  4. Heat polyolefin tubing until complete

For best results: Use heat device of at least 1000°F/538°C. Don’t overheat tubing. Don’t isolate flame. Distribute heat evenly over tubing. 

Material: Multiple wall polyolefin tubing with meltable, integral inner wall.

MIL-1-23053/, Class 1; AMS 3634; UL File E-157227

NOTE: A Quality Crimping tool and Heat Source to shrink down the tubing and seal connector is needed. We recommend our Butane Torch range, and when combined with the recommended T-R-53 Ratcheting Crimp tool these tools make for an easy and consistent connection.  



* There is no official UL Standard for 'waterproof' electrical connectors. Krimpa-Seal Terminal Connectors would most likely fall in the IP67 range (IP - Ingress Protection, 6 - Totally protected against dust, 7 - Protected against the effects of temporary immersion between 15cm and 1m. Duration of test 30 minutes)



SKU KS108-10
Imperial Sizing 8 AWG Ring | #10 Stud
Metric Sizing 8mm Ring | M5 Stud
Product Series Krimpa-Seal
Product Type Crimp and Heat Shrink Terminal
Shipping Weight 0.0050kg


Download NSPA Catalogue

Be The First To Review This Product!

Help other OzLED customers shop smarter by writing reviews for products you have purchased.

Follow us on Social Media